|
80-Channel Switch System Mainframe (without cards)
|
|
|
400-Channel Switch System Mainframe (without cards)
|
|
|
High Density Switch System Mainframe, 2 Slots
|
|
|
Differential 6X32 Matrix Card
|
|
|
Differential Quad 1X40 Multiplexing Card
|
|
|
Shielded GPIB Cable with In-Line Connector, 1m
|
|
|
Shielded GPIB Cable with In-Line Connector, 2m
|
|
|
Double Shielded Premium GPIB Cable, 0.5m (1.6 ft.)
|
|
|
Double Shielded Premium GPIB Cable, 1m (3.2 ft.)
|
|
|
Double Shielded Premium GPIB Cable, 2m (6.5 ft.)
|
|
|
Double Shielded Premium GPIB Cable, 3m (10ft)
|
|
|
Double Shielded Premium GPIB Cable, 4m (13 ft.)
|
|
|
Shielded RS-232 Cable
|
|
|
Shielded IEEE-488 to IEEE-488 Adapter
|
|
|
Quad 1x10 Multiplexer Card w/Multipin Connector (mass termination) (requires 7011-MTC-2 cable or 7011-KIT-R connector kit). For 7001, 7002.
|
|
|
96 Pin Female Connector Kit with solder cups. Includes round adapter cable housing. Use with 7011-C, 7012-C, 7013-C, 7015-C, 7018-C, 7020, 7036, and 7037. Note - On 7021 and 7022 twisted pair wire sets do not match up with HI and LO.
|
|
|
1m Round Cable w/female 96 pin connectors. Pairs of HI and LO with outer shield. Use with 7011-C, 7012-C, 7013-C, 7015-C, 7018-C, 7021, 7022, and 7037
|
|
|
2m Round Cable w/female 96 pin connectors. Pairs of HI and LO with outer shield. Use with 7011-C, 7012-C, 7013-C, 7015-C, 7018-C, 7021, 7022, and 7037
|
|
|
96 Pin Male Connector Kit for bulkhead mount with solder cups. Use with 7011-C, 7012-C, 7013-C, 7015-C, 7018-C, 7020, 7021, 7022, 7035, 7036, and 7037
|
|
|
Quad 1x10 Multiplexer Card with Screw Terminal Connections. For 7001, 7002.
|
