|
Arbitrary WaveForm Generator Single Channel, 125 MS/s; 14 Bit; 2 Mpts
|
|
RF Pin (One Each)
|
|
|
26-Pin Connector and Backshell (No Pins) Two Required
|
|
|
Crimp Tool
|
|
|
Crimp Tool, Coax RG178 50 Ohm
|
|
10 (1x4) (See SMP6101 for Accessories)
|
|
|
10 (1x4) w/SMB Connectors
|
|
20MSa/s 14 Bit Digitizer/IF Receiver
|
|
64 channels muxed to 16-bit 100KHz A/D. Includes a screw connector terminal block.
|
|
16-channel 102.4kSa/s 24-bit digitizer plus DSP
|
|
|
Extraction Tool
|
|
|
Extraction Tool
|
|
|
Crimp Tool, RG179 75 Ohm
|
|
|
Extraction Tool
|
|
|
80MSa/s 14 Bit Digitizer/IF Receiver
|
|
|
40MSa/s 14 Bit Digitizer/IF Receiver
|
|
8-channel, 16-bit Isolated D/A Module
|
|
8 channel Volt IBB (OPT VT1432A-AFV & VT1433B-AFV)
|
|
|
RM Kit for 2 VT3240A/3241A (OPT VT1432A-AXM)
|
|
20 Meter Cable
|
|
|
8-channel 102.4 kSa/s Digitizer with DSP
|
|
|
8-channel 102.4 kSa/s Digitizer with DSP and Arbitrary Source
|
|
|
8-channel 102.4 kSa/s Digitizer with DSP and Local Bus
|
|
Rack Mount Terminal Panel for 32 Channels (No RF filters)
|
|
|
16 channel shielded twisted pair cable for use with VT1586A (only 1 required per VT1586A)
|
|
|
RM Kit for 8 VT3240A/3241A
|
|
|
16-channel 102.4 kSa/s Digitizer w/DSP and Arbitrary Source
|
|
|
8-channel 102.4 kSa/s Digitizer with DSP and Tach Input
|
|
|
8-channel 102.4 kSa/s Digitizer with DSP, Tach Input and Local Bus
|
|
|
2 Meter Cable
|
|
|
16-channel 102.4 kSa/s Digitizer with DSP, Tach Input and Local Bus
|
|
|
Crimp Tool
|
|
|
Crimp Tool
|
|
|
Insertion Tool
|
|
|
Crimp Tool, Coax RG316 50 Ohm
|
|
16 channel 51.2 kSa/sec Digitizer Plus DSP
|
|
|
Pass through adapter, 6 drive lines
|
|
|
20 Meter Cable
|
|
|
Rack mount kit for 2 breakout boxes, 19"
|
|
4 channel MIC/Voltage/ICP Breakout Box
|
|
8 channel 196 kSa/sec Digitizer plus DSP
|
|
8-channel 102.4 kSa/s Digitizer with DSP & ICP and Source
|
|
|
8-channel 102.4 kSa/s Digitizer with DSP & ICP, Source & Local Bus
|
|
|
8-channel 102.4 kSa/s Digitizer with DSP & ICP with Tach Input and TEDS
|
|
|
8-channel 102.4 kSa/s Digitizer with DSP & ICP, Tach Input & Local Bus
|
|
|
8-channel 102.4 kSa/s Digitizer with DSP & ICP w/Tach, Local Bus and TEDS
|
|
|
16-channel 102.4kSa/s 24-bit digitizer plus DSP with built-in IEPE conditioning
|
|
|
16-channel 102.4 kSa/s Digitizer with DSP & ICP, Source and Local Bus
|
|
|
Crimp Tool
|
|
|
Turret Head
|
